Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ALL SVN USERS: PLEASE UPDATE!(2014 March)
03-12-2014, 01:10 AM,
Post: #11
RE: ALL SVN USERS: PLEASE UPDATE!(2014 March)
No, it will not search there. It will look for the botinfo sub-directory only in the data1, arena and tactical directories. Eventually, data1/botinfo should have only the 'official' bot files, and arena/botinfo should have the 3rd-party and legacy bot files. (Someday there might also be 3rd-party bot files in tactical/botinfo).

However, recommend that you do not fix the archives at this time. Instead, instruct those who have updated from the latest SVN to manually move the 3rd-party botinfo directory to the arena directory. That would avoid breaking non-SVN installations. Technically, it would work if the archive had copies of botinfo in 2 places, but that seems messy and unnecessary.

(03-11-2014, 10:26 PM)xenos Wrote: Will crx still search for botinfo where it was, or will it be necessary to fix all the archives at aa3rdparty.org?
Cool  Pie fixes everything. So does BACON!
Reply
03-14-2014, 04:04 PM,
Post: #12
RE: ALL SVN USERS: PLEASE UPDATE!(2014 March)
For Linux users: the instructions for "In-Place Install" (formerly, Alternate Install) were more complicated than necessary. There really is no "install" required. See the correction in the top post.
Cool  Pie fixes everything. So does BACON!
Reply
03-27-2014, 07:26 PM,
Post: #13
RE: ALL SVN USERS: PLEASE UPDATE!(2014 March)
So for the new alternate install, we do a ./configure and make, then copy the binaries from the source directory to the top level SVN directory and run it from there?
[Image: animalt.png]

Chaingun Server Browser
http://hal.nanoid.net/arena/tools/browser
Save a tree or two. Use both sides of toilet paper.
Reply
03-27-2014, 10:34 PM,
Post: #14
RE: ALL SVN USERS: PLEASE UPDATE!(2014 March)
(03-27-2014, 07:26 PM)animal Wrote: So for the new alternate install, we do a ./configure and make, then copy the binaries from the source directory to the top level SVN directory and run it from there?
Yep. That's exactly what the old alternate install did anyway.
Quote:* maxtothemax is back
<maxtothemax> with a vengeance
<maxtothemax> and chips
<maxtothemax> and bean dip
Reply
04-22-2014, 11:07 PM,
Post: #15
RE: ALL SVN USERS: PLEASE UPDATE!(2014 March)
Arrrrgh! I need a raise...
(03-06-2014, 01:45 AM)stratokaztr Wrote: The changes are ready. Updating is messy -- apologies -- but the new configuration is needed to support multiple games and set the groundwork for modernizing the code and improving portability.

...
Reply
04-23-2014, 03:30 AM,
Post: #16
Re: ALL SVN USERS: PLEASE UPDATE!(2014 March)
Don't worry xulb, no need to update your servers yet.
[Image: animalt.png]

Chaingun Server Browser
http://hal.nanoid.net/arena/tools/browser
Save a tree or two. Use both sides of toilet paper.
Reply
05-13-2014, 02:45 AM,
Post: #17
RE: ALL SVN USERS: PLEASE UPDATE!(2014 March)
Where would I find a current list of dependencies?
[Image: dorig.png](Art by {OS}Drastic)
system specs in profile
Reply
05-13-2014, 02:57 AM,
Post: #18
RE: ALL SVN USERS: PLEASE UPDATE!(2014 March)
This is the latest post about dependencies byTik. It should work. But keep in mind the 1st post in this thread.
http://red.planetarena.org/forum/showthr...8#pid10498
(05-13-2014, 02:45 AM){DO}Rigel Wrote: Where would I find a current list of dependencies?
[Image: animalt.png]

Chaingun Server Browser
http://hal.nanoid.net/arena/tools/browser
Save a tree or two. Use both sides of toilet paper.
Reply
05-13-2014, 03:29 AM, (This post was last modified: 05-13-2014, 04:05 AM by {DO}Rigel.)
Post: #19
RE: ALL SVN USERS: PLEASE UPDATE!(2014 March)
I have learned that you can find a dependencies list in your Alien Arena folder: .../docs/docsrc/README.groff

I'm using Mint 16 and I ran .configure over and over to figure out which dependencies I need (cross-referenced with the above README). Here is the list I needed:
Code:
sudo apt-get install -y libx11-dev libjpeg8-dev libcurl4-gnutls-dev libogg-dev libvorbis-dev libfreetype6-dev libode-dev libopenal-dev libgl1-mesa-dev

The ZLib package (libz) was included in the README as well but .configure never prompted me for it, maybe I already have it installed. I'd say the list in the README was pretty good. Cool

Note: You also need these:
Code:
sudo apt-get install -y gcc g++ build-essential

I still can't compile though:

Code:
checking for gcc... gcc
checking whether the C compiler works... no
configure: error: in `/home/charles/alienarena':
configure: error: C compiler cannot create executables
See `config.log' for more details

The config.log:
Code:
...
gcc: error: unrecognized command line option '-fset-stackprotector-all'
configure:3626: $? = 1
configure:3664: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "alienarena"
| #define PACKAGE_TARNAME "alienarena"
| #define PACKAGE_VERSION "7.66.1"
| #define PACKAGE_STRING "alienarena 7.66.1"
| #define PACKAGE_BUGREPORT "alienrace@comcast.net"
| #define PACKAGE_URL ""
| #define PACKAGE "alienarena"
| #define VERSION "7.66.1"
| /* end confdefs.h.  */
...

I have no clue what to do next
[Image: dorig.png](Art by {OS}Drastic)
system specs in profile
Reply
05-13-2014, 04:13 AM,
Post: #20
RE: ALL SVN USERS: PLEASE UPDATE!(2014 March)
(05-13-2014, 03:29 AM){DO}Rigel Wrote:
Code:
sudo apt-get install -y libx11-dev libjpeg8-dev libcurl4-gnutls-dev libogg-dev libvorbis-dev libfreetype6-dev libode-dev libopenal-dev libgl1-mesa-dev
Rigel, I'm working also with Mint 16 and first I had some trouble too. But when I installed this list. Everything was fine and worked for me

sudo apt-get install libx11-dev libxxf86dga-dev libxxf86vm-dev
libgl1-mesa-dev libopenal-dev libogg-dev libvorbis-dev
libcurl4-gnutls-dev libfreetype6-dev libjpeg8-dev libode-dev g++


After this
./configure
Sudo Make
Sudo Make Install
[Image: AAcbmp.png]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)